Installation of Vehicle Graphics & Wraps

Vehicle graphics and wraps are an excellent way to personalize and promote your business, and the installation process is relatively simple. Whether you’re a first-time installer, or a professional looking for a refresher, this article will help you get started with the installation process.

Before beginning the installation, it’s important to make sure that you have all the necessary supplies and tools. Vehicle wraps are typically supplied with a kit that includes installation tools and instructions, as well as the vinyl material, adhesive, and primer. Make sure to read the instructions carefully before beginning the installation process.

The first step is to prepare the surface of the vehicle. The vehicle should be washed, dried, and wiped down with a wax and grease remover. Any areas that will be covered with the wrap should be sanded to create a rough texture that will help the vinyl adhere.

The next step is to measure the surface of the vehicle to ensure that the wrap is cut to the correct size. Once the measurements are taken, the vinyl can be cut to size. It’s important to take your time when cutting the vinyl, as any mistakes will be difficult to fix.

After the vinyl has been cut to size, it’s time to prepare the adhesive. Applying the adhesive is one of the most important steps in the installation process, and it’s important to make sure that the adhesive is spread evenly. Once the adhesive has been applied, the vinyl can be placed onto the vehicle’s surface.

The next step is to use a squeegee to press the vinyl onto the surface of the vehicle. The squeegee should be used in a back-and-forth motion to ensure that the vinyl is securely adhered to the vehicle. Once the vinyl has been pressed onto the vehicle, use a heat gun to activate the adhesive and ensure a secure bond.

Finally, the edges of the vinyl should be trimmed away with a razor blade. This will help create a clean and professional-looking finish. Once the installation is complete, the vehicle should be washed and waxed to protect the vinyl.

Installing a vehicle wrap is a relatively simple process that can be done by anyone with a bit of patience and attention to detail. With the right supplies and tools, anyone can create a professional-looking vehicle wrap.

Translate »